Water soluble paint based on special acrylic resins and metal pigments, specially designed to give an impressive metallic finish to any surface. It can be used to decorate walls, columns, ceilings, plasterboard, but also surfaces made of wood, plastic or metal, after proper preparation. Vitex Metallico, however, does not only give a wonderful aesthetic result. Due to the high reflective capacity of infrared radiation (IR), it also contributes to the thermal insulation of buildings. Walls painted with Vitex Metallico help maintain a constant room temperature by acting as a natural air conditioner. It is practically odourless during application because it does not contain ammonia.
• Metal Finish
• 3 Shades: Pandora, Helios, Selene
• Ideal for Styles
Available in 3 shades: 500 Pandora (silver), 520 Helios (gold) and 530 Selene (bronze).
The 500 Pandora shade is also used as a base for creating 30 suggested color palette shades through Vitex Colorfull Shade Creation System.
Surfaces must be clean, dry and smooth, free of dust, oil or any loose material.
Acrylic Building Stucco or Visto is used for plastering the holes and troweling any cracks.
Old water-painted surfaces (with lime or glue) are primed with Acrylan Unco Eco or Durovit.
New surfaces of plaster, concrete, bricks, plasterboard, etc., as well as trowel surfaces are primed with 100% Acrylic Primer or Acrylan Unco Eco or Blanco Eco.
Surfaces soiled with nicotine, tobacco, markers, coffees and other stains are primed with Blanco Eco or Vitosin.
Wooden surfaces are primed with Velatura water.
Surfaces made of PVC, aluminum, glass, etc. primed with Glossy Surface Primer.
Metal surfaces are primed with anti-rust substrate, such as Metal Primer, Anti-Rust Primer, etc.
The product is stirred well before use. It is applied in two coats with a roller, brush or airless gun and diluted up to 10% with water. It should not be applied at temperatures lower than 5°C, higher than 35°C and/or relative humidity above 80%.
The product is dry to the touch in 1-2 hours and repainted after 6-8 hours. These times vary depending on the weather conditions (relative humidity and temperature).
Surfaces painted with Vitex Metallico are washed using a soft sponge with water and in case of persistent stains with a soft, colorless detergent, after at least three weeks of painting.
Tools are cleaned immediately after use with water and if necessary with soap or detergent.
– All Prices Include 19% VAT
– Όλες οι τιμές περιλαμβάνουν ΦΠΑ 19%