Plastic paint for general interior use with high coverage and high efficiency. An economical proposal that makes it suitable for walls, ceilings, warehouses and in general for areas that need frequent painting. It is easy to work with and spreads beautifully giving a smooth matte surface.
• General indoor use
– Great coverage
• For areas that need frequent painting

SHADES
Available in white, and in a rich range of shades through Vitex Colorfull Shade Creation System.

PROCEDURE
Surfaces must be clean, dry and smooth, free of dust, oil or any loose material.
Acrylic Building Stucco or Visto is used for plastering the holes and troweling any cracks.
Old water-painted surfaces (with lime or glue) are primed with Acrylan Unco Eco or Durovit.
New surfaces of plaster, concrete, bricks, plasterboard, etc., as well as trowel surfaces are primed with 100% Acrylic Primer or Acrylan Unco Eco or Blanco Eco.
Surfaces soiled with nicotine, tobacco, markers, coffees and other stains are primed with Blanco Eco or Vitosin.

APPLICATION
The product is stirred well before use. It is applied in two coats with a roller, brush or airless gun and diluted up to 10% with water. It should not be applied at temperatures lower than 5°C, higher than 35°C and/or relative humidity above 80%.
The product is dry to the touch in 15-30 minutes and can be repainted after 3-4 hours. These times vary depending on the weather conditions (relative humidity and temperature).
Surfaces painted with Vista Plastic are washed using a soft sponge with water and in case of persistent stains with a soft, colorless detergent, after at least three weeks of painting.
Tools are cleaned immediately after use with water and if necessary with soap or detergent.