White, matte alkyd varnish solvent substrate, suitable for the preparation of wooden surfaces and walls. Creates an ideal surface for finishing with varnishes (Verolac, Platinum, Aquavit). It offers whiteness, high coverage, while at the same time combining soft work, perfect spread and easy rubbing.

• High coverage
• Excellent spreading – working – rubbing

Available in white.

Surfaces must be clean, dry and smooth, free of dust, oil or any loose material.
On new wooden surfaces the roses are removed and impregnated with preservative Diaxyl Décor.
Acrylic Building Stucco is used for plastering the holes and troweling any cracks.

The product is stirred well before use. It is applied in one or two coats with a roller or brush with a dilution of 3% with Brush Solvent T 300 or airless pistol with a dilution of 3% with Pistol Solvent T 350. It should not be applied at temperatures lower than 5°C, higher than 35°C and/or relative humidity above 80%.
The product is dry to the touch in 2-3 hours and can be repainted after 16-18 hours. After it dries completely, it is sanded with a suitable sandpaper, the dust is removed and Vitex water or solvent varnish is applied. These times vary depending on the weather conditions (relative humidity and temperature).
Rollers, brushes and stains on the floor are cleaned with Brush Solvent T 300 and then with soap or detergent. Pistols are cleaned with Pistol Thinner T 350.



– All Prices Include 19% VAT
– Όλες οι τιμές περιλαμβάνουν ΦΠΑ 19%

    Your Cart
    Your cart is emptyReturn to Shop