Pool Paint is a 2-component epoxy paint, specially designed for maximum resistance under water. Suitable for cement pools and metal surfaces. Provides a glossy and elastic surface particularly resistant to cleaning systems and pool chemicals. It has excellent adhesion and high resistance to abrasion, acids, alkalis and water, offering long-term protection.

• Epoxy paint of 2 components
• Flawless traction
• Top resistance to chlorine and pool chemicals

SHADES
Available in white and light blue.

PROCEDURE
Surfaces must be clean, dry without dust, oils, loose materials or old one-component paints and sanded with a suitable sandpaper.
On cement surfaces, the same paint is used, diluted 10-15% with Solvent Pool Paint.
It is applied in a new pool at least 28 days after its construction.

APPLICATION
Mix the AD component and gradually add Pool Paint. Then add the entire amount of BD ingredient and stir well for 3 minutes. The mixture should be used 5-10 minutes after mixing the two ingredients and within 4-6 hours at an ambient temperature of 30 ° C and 20 ° C respectively.
It is applied in two – three coats with a roller, brush or airless gun with a 5% dilution. It should not be applied at temperatures lower than 5°C, higher than 35°C and/or relative humidity above 80%.
The product is dry to the touch in 1-2 hours and repainted after 12 hours. Its repainting time should not exceed 2 days. The pool can be filled with water 7 days after painting, where the paint acquires its final properties. These times vary depending on the weather conditions (relative humidity and temperature).
The tools are cleaned immediately after use with Solvent Pool Paint.