Economical acrylic paint for exterior walls

Economical acrylic paint for outdoor use. It is suitable for frequent repainting of exterior walls. It covers effectively, is easy to apply providing a uniform and “breathable” matte finish.

»Very good coverage
»Easy to apply
»Suitable for frequent repainting

SURFACE PREPARATION
The surface must be dry, stable and free of dust, other debris and loose old paint. Wet sanding is recommended for surface preparation.
»On new surfaces: Before applying the paint, apply a coat of water primer such as KRAFT ECO DUR AQUA, KRAFT DUR AQUA WHITE, KRAFT HAFT or KRAFT DUR.
»On surfaces that need repair: use KRAFT SPACHTEL or KRAFT PUTTY or the appropriate KRAFT repair material.
»Allow new plaster or cement surfaces to dry completely for at least 30 days before applying the paint.

APPLICATION INSTRUCTIONS
»Avoid application in case of impending rain for the next 7 days.
»Before you start painting, dilute up to 10% vol. with tap water and stir well.
»Suitable painting tools are: Brush or roller.
“The product must be coloured exclusively with the KRAFT INSPIRED COLOR colouring system on the recommended colouring base.
“For uniformity in shade and final finish, it is recommended to use containers from the same production batch. In case of different batches it is recommended to mix them in one large container.
»Tonal deviation may occur in some shades
» Το GO! EXTERIOR White is painted with the basic colors KRAFT MASTER BASICS for unlimited light shades.
»Apply 2 coats of KRAFT GO! EXTERIOR for an ideal result.
»Minimum repaint time 3-4 hours.
»Surface drying in 1-2 hours at 25 ° C and relative humidity 50%. The drying time is affected by the weather conditions.
“It is not advisable to apply the paint topically after the surface has been painted. There may be a difference in gloss or shade due to absorbency or application method. If necessary, total painting of the surface is recommended.
” Do not apply at temperatures below 5°C and above 35°C and above 65% relative humidity.

INSTRUCTIONS FOR POST-APPLICATION
»Clean the tools immediately after use with warm soapy water.
“Close the container tightly to keep it in good condition for future use and store it before and after use in a cool place away from exposure to sunlight or frost.