Special anti-rust primer of epoxy base, one component, rich in zinc powder. Provides high and long-lasting corrosion protection (cold galvanizing). Suitable for priming metal surfaces, such as pumps, piping and metal structures, in industrial environments and coastal areas.
• Cold galvanizing
• An epoxy based component
• Rich in zinc powder
Available in gray.
Surfaces must be cleaned with T 300 Brush Solvent, dry and smooth, free of dust, oils and sanded with suitable sandpaper (especially freshly galvanized sheets).
The product is stirred well before use. It is applied in one or two layers with a roller, brush or airless pistol with dilution up to 5% with Pistol Solvent T 350. It should not be applied at temperatures lower than 5°C, higher than 35°C and/or relative humidity above 80%.
The product is dry to the touch in 45-60 minutes and repainted after 9-12 hours. After it dries completely, it is sanded with a suitable sandpaper, the dust is removed and Vitex water or solvent varnish is applied. These times vary depending on the weather conditions (relative humidity and temperature).
Tools are cleaned immediately after use with T 350 Pistol Solvent.
– All Prices Include 19% VAT
– Όλες οι τιμές περιλαμβάνουν ΦΠΑ 19%