Acrylic coating

Decorative, ready to use, organic coating of high solids. It is based on a combination of acrylic polymer suspension, natural granules and additives. It is suitable for use on exterior or interior surfaces of standard building materials as well as on previously painted surfaces. It is certified according to ETA 10/0122, to be used with excellent results as the last layer in external thermal insulation systems, as it improves the durability and performance of these systems and especially the ClimaTotal system. It has high adhesion and excellent resistance to rain, frost, air pollution, sea humidity and sudden temperature changes. Inhibits the growth of bacteria, algae and fungi. It has excellent mechanical strength, high water vapor permeability and perspiration.

»Durable finish
»High water vapor permeability and perspiration
»Excellent mechanical strength
»Resistance to adverse weather conditions

SURFACE PREPARATION AND APPLICATION INSTRUCTIONS
»To ensure better adhesion, the surface is required to be dry, clean and free of dust, oils, salts, rust, loose paint and residue, puffy paints, etc. Before application, remove psoriasis, fungi and greenery with mechanical sanding, wash with soapy water and allow the background to dry. »Use KRAFT PUTTY to fill in gaps, cracks and other worn surfaces. It is recommended that fresh concrete, putty, plaster and gypsum surfaces be allowed to dry for at least 4 weeks before applying ACRYLIC PLASTER.
»On porous, new surfaces or already painted substrates and on the Strong Bond reinforcing coating of the CLIMATotal® system, apply a layer of PLASTER PRIMER.
»After 24 hours, apply a layer of ACRYLIC PLASTER, with a stainless steel spatula, and adjust the thickness of the coating to the grain size, with a plastic spatula. On large surfaces it is recommended to apply without interruption, liquid to liquid, in order to avoid visible connections.

APPLICATION INSTRUCTIONS
»Tools: Apply the product with a stainless steel metal spatula or viscous material gun. Then sand with a plastic spatula to smooth the surface to the size of the grain.
“Cleaning tools: immediately after application, tools should be cleaned with warm water and soap or a detergent solution. Remove as much plaster from the tools as possible before cleaning.
»Dilution: Dilution is not recommended.
»Surface drying time: 1-2 hours at 25ºC and relative humidity 50%.
»Minimum repainting time: 24 hours at a temperature of 25ºC and relative humidity 50%.
»Complete drying time: 14 days at a temperature of 25ºC and relative humidity 50%.
Drying times are prolonged at lower temperatures and at higher relative humidity. Stir the product before use and at regular intervals during application with a mechanical drill.
»Do not apply at temperatures below 5ºC and above 35ºC as well as at humidity levels above 65%.
“Do not apply in case of imminent rain or in direct sunlight and wind. Protect the applied surface with burlap.