GENERAL CHARACTERISTICS

High quality acrylic paint based on 100% acrylic resins for exterior use. It offers high opacity, unrivalled performance and excellent resistance to adverse atmospheric conditions. It has very good spreadability, gives a smooth matt surface and ensures breathability on the surfaces where it is applied. Acrylan 100% acrylic paint can be used on any kind of new or old surface of plaster, concrete, spatulated surfaces, wood, etc., after proper preparation. Translated with www.DeepL.com/Translator (free version)

– 100% acrylic
– Certified cold material
– Breathable and waterproof
– Unrivalled performance
– Excellent resistance to adverse weather conditions
– High Quality and in HD shades

SPECIAL FEATURES
Certified by the University of Athens, Department of Physics, for its properties as a cold material, with:
Initial full-spectrum solar reflectance SR = 0.86 (300-2500 nm) (ASTM E 903-96 and ASTM G 159-98)
E = 0,88 (ASTM E 408 -71 -2002)
Solar reflectivity index SRI = 108 (ASTM E 1980-01)

SHADES
Available in white and an unlimited number of shades through Vitex’s Colorfull Shade Creation System.

PROCEDURE
Surfaces must be clean, dry and smooth, free of dust, oil or any loose material.
Acrylic Building Stucco is used to fill the holes and patch any cracks.
Old water-coloured surfaces (with lime or glue) are primed with Durovit or Acrylan Unco Eco or Vitosin.
New surfaces made of plaster, concrete, brick, etc., as well as sputtered surfaces are primed with Durovit or Acrylan Unco Eco.

APPLICATION
The product is stirred well before use. It is applied in two coats with a roller, brush or airless gun and diluted up to 10% with water. It should not be applied at temperatures below 5°C, above 35°C and/or relative humidity above 70% or if there is a risk of rain or frost in the next forty-eight hours.
The product is dry to the touch in 30-60 minutes and can be repainted after 3-4 hours. These times vary depending on the weather conditions (relative humidity and temperature).
Surfaces painted with Acrylan are washed using a soft sponge with water and in case of persistent stains with a mild, colourless detergent, after at least three weeks after painting.
Tools are cleaned immediately after use with water and if necessary with soap or detergent.