Drywall primer

White water-soluble acrylic primer for interior use with excellent filling capacity suitable for plasterboard and masonry surfaces such as trowels, plaster, concrete, etc. It gives very good adhesion, smoothing out the surface irregularities of the plasterboard. Contributes effectively to the coverage of the final color. It is repainted with any plastic color and is almost odorless.

»It perfectly fills the surface, smoothing out imperfections
»Contributes to the final coverage
»Repaint with any plastic paint

SURFACE PREPARATION
The surface must be dry, stable and free of dust, other debris and loose old paint. Wet sanding is recommended for surface preparation.
»On new surfaces: Before applying the paint, apply a coat of KRAFT GO! PLASTERBOARD PRIMER.
»On surfaces that need repair: Use KRAFT SPACHTEL or KRAFT PUTTY or the appropriate KRAFT repair material.
»Allow new plaster or cement surfaces to dry completely for at least 30 days before applying the paint.

APPLICATION INSTRUCTIONS
»Before you start painting, dilute 8-12% vol. with tap water and stir well.
»Painting tools: Brush, roller or airless gun.
»Apply 1 coat of KRAFT GO! PLASTERBOARD PRIMER for ideal result. Then apply 2 coats of the final product.
»Minimum repaint time: 3-4 hours.
»Surface drying: ½-1 hours at 25 ° C and relative humidity 50%. The drying time is affected by the weather conditions.
” Do not apply at temperatures below 5°C and above 35°C and above 65% relative humidity.

INSTRUCTIONS FOR POST-APPLICATION
“Close the container tightly to keep it in good condition for future use and store it before and after use in a cool place away from exposure to sunlight or frost.
»Clean the tools immediately after use with warm soapy water.