Hydroguard One System (Hydroguard One 40 Grey/White + water) is a one-component, polymer-modified, cementitious, waterproofing system. It contains a new generation of hydrophobic polymers and selected quartz aggregates, which provide high water insulation protection, mechanical strength and excellent adhesion to structural substrates.
Advantages
- Complete, multi-purpose, “smart” waterproofing system with several combinations
- Meets high technical requirements
- Resistant to temperature changes
- Excellent workability
- High water vapor permeability
- Non-corrosive (free of chloride ions and lime)
- Indoor and outdoor usage
Technical Information
4,65 Lt νερό/25Kg, 0,93 Lt νερό/5Kg
1,2 – 1,4 Kg/m2/mm
2-3 hours
Application – Tools
General Information
It is suitable for waterproofing horizontal or vertical surfaces subject to partial or continuous moisture, basement surfaces indoor and outdoor (before backfilling), wet spaces (bathrooms), walls, concrete, renderings and other structural elements. Provides protection against carbonation of concrete. Suitable for positive and negative humidity pressures.
How to Use
To ensure good adhesion substrate should be sound, clean, free of dust, oil, lime, tar and loose elements.
- Light soaking with water before use. On substrates with high absorbency (eg brick, aerated concrete, old plasters, etc.) it is recommended to apply Eco Dur Aqua by KRAFT PAINTS diluted 1:1 to 1:2 with water. Caution! The primer must properly be diluted in order to be completely absorbed and avoid film formation to the substrate surface.
- On non-absorbent substrates, it is recommended to use Epoxy Aqua Floor Primer by KRAFT PAITS with simultaneous application of quartz sand. Caution! The application of the waterproofing layer must be carried out between 24 – 48 hours after priming.
- For necessary repairs before application (smoothing, grooves formation, etc.) the appropriate repairing mortars from KRAFT PAINTS are selected.