Ecological white, matt water-soluble substrate based on modified new technology resins. It is certified according to the criteria of the Eco-Label Award Council of the European Union. It is suitable for interior and exterior surfaces, such as wood, glass, hard PVC, aluminum, galvanized and properly primed metal surfaces. Due to its special composition, it covers and fills the surface effectively, offering excellent adhesion even on old painted surfaces. It is odorless, spreads evenly without leaving wrinkles and sparkles and is easily rubbed. It is repainted with water color but also with Vitex solvent colors.

• Category A + in indoor air quality
• Excellent adhesion to wood, glass, hard PVC, aluminum etc.
• Quick drying
• Covers and fills optimizing the final finish
• Excellent rubbing

SHADES

Available in white.

PROCEDURE

Surfaces must be clean, dry and smooth, free of dust, oil or any loose material.
On new wooden surfaces, the roses are removed and impregnated with a preservative Diaxyl Extra Water.
Acrylic Putty is used to plaster the holes and trowel any cracks. Rub the surface well and make sure it is completely dry before priming.

APPLICATION

The product is stirred well before use. It is applied in one or two coats with a roller, brush with 5-10% dilution with water or airless pistol with 10-15% dilution with water. In case of application of dark shades of final color, you can first prime the surface with Velatura Eco as it is or lightly painted in the tone of the desired final shade, through the Vitex Coloring system. It should not be applied at temperatures lower than 5°C, higher than 35°C and/or relative humidity above 80%.
The product is dry to the touch in 30-60 minutes and repainted after 6-8 hours. After it dries completely, it is sanded with a suitable sandpaper, the dust is removed and Vitex water or solvent varnish is applied. These times vary depending on the weather conditions (relative humidity and temperature). After applying the paint, seal the container tightly and store it at temperatures between 5oC and 38oC for future use.
Tools are cleaned immediately after use with water and if necessary with soap or detergent. Do not empty the washing liquids into the water table. Special handling of paint residues is required, not to be disposed of with household waste or dumped. Ask your local authority for advice on their disposal and collection.